manual

PROBLEM SOLVING
If you have any queries about your DIGITAL 2 SMART remote control:
• read this Instruction Booklet carefully - you will find an answer to most of your questions
• consult the website www.meliconi.com/guide where you will find the answers you need easily and
quickly.
INFO-LINE
WARRANTY: 2 years
The warranty ceases to be valid if the product is
tampered with or used incorrectly.
Type of remote control GumBody
Remote control model DIGITAL 2 SMART
Purchase date
Dealer’s stamp
The symbol of the crossed trash can shown on the remote control indicates that once the product has reached
the end of its working life it should be disposed of separately from other waste. The user should, therefore, take
the remote control to a specialised collection centre for electronic and electrical waste, or hand it over to the dealer
when purchasing a new similar remote control, on a one to one basis. Correct separated collection for subsequent
recycling, processing and environmentally compatible disposal contributes in preventing possible negative effects
on the environment and on health and favours the recycling of the materials used in producing the remote control.
SOLUTION
Test some other widely used keys. If the problem
persists, check that the batteries are fitted correctly.
If necessary, replace them with 2 new 1.5 V
AAA/LR03 batteries.
Check that the batteries are new and that the remote
control is pointing at the TV without any obstacles
in the way. If required, reset the remote control
code, following the programming procedure.
The batteries are low. Change them.
You may have used the wrong code. Reset the
remote control code, following the programming
procedure.
Follow the programming procedure using the
substitute brand code 0099. Alternatively, to find
the code with which to programme your remote
control consult the on-line guide at
www.meliconi.com/guide
PROBLEM
The appliance does not respond and the light
indicator does not light up when a key is
pressed.
The appliance does not respond but the light
indicator lights up.
The light indicator flashes when a key is held
down but the appliance does not respond.
The remote control commands are not all
working correctly.
The make of your TV is not included in the list
of codes at the end of this booklet.
20