Operation Manual

ManualsBrandsMELICONI ManualsTVMELICONI FULLY 8

Fully 8 RC

Keep this booklet for future reference.

Thank you for choosing a Meliconi remote control.

The FULLY 8 RC universal remote control is ideal for replacing up to 8 remote controls of any brand for TV, Digital Terrestrial

(TER), Satellite (SAT) Decoders, DVD players (including Blu Ray), Videotape recorders (VCR), Personal video recorders

(PVR), cable TV (CAB), other audio video equipment (AUX) or decoders for ADSL TV (ADSL). The remote control has a non-

volatile memory, meaning that it does not lose its settings even if there are no batteries in it.

IMPORTANT: the device must not be exposed to excessive heat sources.

USE OF THE BUTTONS AND FUNCTIONS

The functions of the buttons described below are available only if they are also present on the original remote control.

Volume control +/–

TELETEXT buttons

ON/OFF switches the device OFF and

in some cases ON

Numeric keypad

Conﬁ rm selection

MUTE

turns sound OFF and ON

For selecting an external input

source

For selecting the next programme P+

or the previous programme P–

For moving around within the MENU

Fastext functions or for selecting

sub-menus using colours

Buttons for selecting the device to be

controlled.

DVD/PVR RECORD PAUSE STOP PLAY

buttons

DVD and PVR forward/back functions

Speciﬁ c buttons for decoder

Displays the list of programmes

Selects analogue/digital

Selects digital TV and radio

Summary of content (4 pages)

PAGE 1
Fully 8 RC Thank you for choosing a Meliconi remote control. Keep this booklet for future reference. The FULLY 8 RC universal remote control is ideal for replacing up to 8 remote controls of any brand for TV, Digital Terrestrial (TER), Satellite (SAT) Decoders, DVD players (including Blu Ray), Videotape recorders (VCR), Personal video recorders (PVR), cable TV (CAB), other audio video equipment (AUX) or decoders for ADSL TV (ADSL).
PAGE 2
INSERTING THE BATTERIES The remote control requires 2 new 1.5V alkaline AAA/LR03 batteries. Insert them as illustrated. Try pressing a number button and check that the red light remains lit continuously until you release the button: if the light flashes, the batteries inserted are not charged and are about to go flat, therefore you must substitute them.
PAGE 3
SETTING CODES USING A MANUAL SEARCH (only to be performed if the specific code could not be found) 1. Switch on the device to be programmed: if TV, SAT, TER select a programme - if DVD insert a DVD, for videotape recorders insert a cassette 2. Hold down the selection button corresponding to the device whose code you want to find (e.g.: light starts to flash. 3. Now release the button and briefly press the button or ) until the indicator for a DVD, VCR and PVR. 4.
PAGE 4
Code obtained = 1306 4. Make a note of the code obtained on the label on the inside of the battery cover. You may need it in future. TROUBLESHOOTING PROBLEM The device does not respond and the indicator light does not come on when a button is pressed. SOLUTION Make sure that the batteries are inserted correctly, or substitute them with 2 new 1.5V alkaline AAA/LR03 batteries. The device does not respond but the indicator light comes on.