Instruction manual

15
R7 English
Position Sensor Screen Position Sensor OFF
Screen
Position Sensor ON and
SIGNAL OFF Screen
Position sensor
The position sensor of your OMRON R7 can be switched ON or OFF. In the factory preset the
position sensor is enabled. If the position sensor is switched ON you can choose to have the
optimal wrist height supported by an acoustic sound (SIGNAL ON or OFF).
Measuring (Wrist) Screen
Measuring (Wrist) Right
Wrist Screen
Left or right wrist measurement
Normally blood pressure is measured on the left wrist (factory preset). With your OMRON R7
you can choose to use the monitor either on your left or right wrist. It is recommended to use
the same wrist when for optimal comparisons of your blood pressure fluctuations.
Alarm Screen
Alarm
Your blood pressure monitor has the possibility to set an alarm twice a day. The alarm function
can be used to monitor your blood pressure at the same time every day or as a reminder for
pill intake.
The alarm will sound for 2 minutes. By pushing the on/off button the alarm will stop. The alarm
will not sound when the blood pressure monitor is used (e.g. for measuring or graph display) at
the moment the alarm is set.
You can set the requested hour by pushing (

) when flashing. Press SET to lock the hour
and proceed with the minutes. By pushing the (

) you can set the minutes. Press SET to
confirm and to proceed. Push either (

) to enable ( ) or disable ( ) the alarm. Press
SET to lock the settings.
Screen of indicating that
the alarm is sounding
HEM-637-E2 EN 7/8/10 9:18 AM Page 15