HW-302 IM 11/07/02 9:54 Side 1 ® Model: HW-302 Art. No.
HW-302 IM 11/07/02 9:54 Side 2 Please read this instruction manual carefully and familiarise yourself with your new jug kettle before using for the first time. Please retain this manual for future reference. IMPORTANT SAFEGUARDS: When using your kettle, basic safety precautions should always be followed, including the following. 1. Read all instructions carefully, even if you are familiar with the appliance. 2. Close supervision is necessary when any appliance if used by or near children. 3.
HW-302 IM 11/07/02 9:54 Side 3 purposes. 20. To protect against fire, do not operate in the presence of explosive and/ or flammable fumes. 21. A kettle should not be left connected to a wall socket when the room temperature is likely to fall to outdoor winter temperatures. At sub-zero temperatures the automatic control thermostat may reset to boil energize the element. 22. Do not use the kettle for any purpose other than heating water. Other liquids or food will contaminate the interior. 23.
HW-302 IM 11/07/02 9:54 Side 4 INSTRUCTIONS FOR USE: 1. Before first use, fill the kettle with clean water to maximum capacity and boil. Discard the water and repeat. 2. The kettle should always be unplugged when filling or adding water. 3. Fill the kettle with water to the desired level. Do not overfill or there will be a risk of spillage or spitting. The water level indicator will assist you to measure correct amount. You can fill the kettle via the spout or after opening the lid.
HW-302 IM 11/07/02 9:54 Side 5 HOW TO CARE FOR YOUR KETTLE: Wipe the exterior of the kettle with a soft, damp cloth or sponge. Remove stubborn spots with a cloth moistened with mild liquid detergent. Do not use abrasive scouring pads or powders. Never immerse the kettle in water or other liquids. Since this kettle has concealed heating element, is it important to keep the bottom clean, between the decalcification you may use a washing-up brush or sponge.
HW-302 IM 11/07/02 9:54 Side 6 THE WARRENTY DO NOT COVER - If the above points have not been observed. - If the appliance has not been properly maintained, if force has been used against it or if it has been damaged in any other way. - Errors of faults owing to defects in the distribution system. - If the appliance has been repaired or modified or changed in any way or by any person not properly authorised.
