User Manual

Transport, storage and disposal
91
ENGLISH
Problem Cause Action
The My Bean Select
display goes out
when the measuring
spoon is put back on.
There are less than 8
g of coee beans in
the bean chute.
 Top up coee beans (see sec-
tion5.1 one page69).
Fill beans appears on
the display although
the bean container
is full.
Coee beans do
not drop into the
grinder.
 Press a direct key.
 Tap lightly on the bean container.
 Clean the bean container.
 Coee beans too oily. Use dierent
coee beans.
Loud grinder noise. Foreign object in the
grinder.
 Contact the hotline.
Brewing unit cannot
be inserted after
removing.
Handle for the
locking mechanism
of the brewing unit
is not in the correct
position.
 Check that the handle for the
locking mechanism is correctly
engaged (see section9.3 one
page83).
Drive is not in the
correct position.
 Press and hold the "Coee
strength" button. Also press the
ON/OFF button. The appliance
initialises. Release buttons again.
System error appears
on the display.
Software problem.
 Switch the appliance o and
on again (see section4.1 one
page60).
 Contact the hotline.
11 Transport, storage and disposal
11.1 Venting the appliance
We recommend venting the appliance when it is not used for a long period,
prior to transport and when there is a risk of frost.
During venting, residual water is removed from the appliance.
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
3. Navigate to the System > Venting menu.
4. Select Start using the arrow buttons and conrm with "menu/ok".
5. Follow the further instructions on the display.
» The appliance switches o.