Operating instructions

10
Operating Instructions Pages 9 - 23
3. Display
The machine’s current status, the selected program, product data
etc. are all displayed with the relevant text in the display field (1).
The following display texts are only examples.
As soon as the machine is connected to the mains, the following
texts appear in the illuminated display field: (1)
4. Starting operation
4.1 Feeding in ground coffee
 Open the lid of the ground coffee hopper (10) with the key
and remove.
 Fill with the required quantity of ground coffee, or up to the
maximum capacity of 2.5 kg (depending on coffee blend).
The ground coffee must not be pushed. In order to prevent
any loss of quality in the coffee, a quantity should be cho-
sen which will be used up within a maximum of 5 days.
 Replace the lid and lock.
If there is only a small amount of ground coffee left in the
hopper during operation, the following text appears in the
display (1)
and an acoustic signal will sound.
 Fill in the required quantity of ground coffee. Caution: Do
not put hands into hopper. There is a danger of crushing!
 Push the button.
The text in the display (1) changes back to the selected pro-
gram.
4.2 Switching on the machine
Make sure that the stop valve of the water supply is open and the
electrical supply switched on.
 Set key-operated switch (9) to „Operator/ON“.
If the machine was previously switched off according to instructions
(see 9. „Switching off the machine“, page 14), the display (1) will
now show in the top line the selected program and any stored cof-
fee in the urn (S :).
The following alternating messages are shown in the second line
of the display:
The machine is heating up now.
When the machine has reached its operating temperature, the
alternating messages end.
An automatic pre-warming process is carried out by the machine.
The filter unit, storage urn and coffee transport tubes are all rinsed
with hot water.
 If the storage urn is empty and a program is selected, the
machine begins automatically to prepare coffee.
(1
The current status of the machine is displayed here (see 16.
„Display messages“, page 23).
Prog. : 2 Ltr. S : 0,0 Ltr.
**** PLEASE WAIT ****
Prog. : 2 Ltr. S : 0,0 Ltr.
** BOILERTEMPERATURE **
COFFEE ==> SET
c2000
c2000 Plus
 If the machine was switched off manually at the key-opera-
ted switch and the cleaning program was not its last action,
the following message is displayed on switching on:
After completing all preparations (heating up, pre-warming
etc.), the machine displays the following message:
In this case please follow the cleaning program menu (see
8.2.3 „Starting automatic cleaning“, from display message
„Start cleaning ?“ onwards, page 13).
 If you do not want to start the cleaning program (Please
remember however: Only a clean machine guarantees
satisfied coffee drinkers), push the button and the
machine will switch to its operating program.
Please note: If there is any liquid left in the storage urn (e.g.
„cold coffee“ from the previous day, as the machine was
switched off manually with a filled storage urn), the freshly
prepared coffee will be mixed with these remains.
Caution: If the machine was switched off in the middle of a pro-
gram, the machine first completes these programs after restarting
(Break and poss. Pre-warming) with the corresponding messages
in the display (1). See also section 16. „Display messages“, page 23.
5. Programs (Description of process)
You want to select a coffee storage volume and start a filtering
program? See 12.2 „Selecting filter program and storage volu-
me”, page 17.
When the machine has reached its operating temperature after
switching on and the pre-warming program has been completed, or
if during operation the storage volume in the urn (11) falls below the
selected minimum quantity, the machine automatically begins the
filtering process to achieve the selected storage volume. The fol-
low-ing message is displayed:
The filtered coffee runs into the storage urn. The current storage
volume is shown in the top right of the display.
The following programs are available:
- Single brew 0.5 litres (without follow-up brewing)
- Storage volume 1.0 litre
(2
- Storage volume 2.0 litres
(2
- Storage volume 3.0 litres
- Storage volume 4.0 litres
If no follow-up brewing is required (e.g. at the end of business, or
before longer breaks), the program „Storage volume 0 litres“ can
also be selected. The machine can now be emptied without any
subsequent filtering.
The settings and programs can be selected with the key-operated
switch in the „Manager“ position when Menu 1 is set, or in the
„Operator“ position if Menu 2 is set. See section 12. „Settings, Pro-
gramming”, page 16.
When the key-operated switch is in the „Operator” position,
the filtering processes start fully automatically.
(2
if storage urn drainage is activated „Brew volume“ is displayed.
See 6. „Automatic storage draining”, page 11.
BREWING S : 1,2 Ltr.
START CLEANING ?
= = > PUSH JW + CC
CLEANING ! S : 1,8 Ltr.
XXXX
(1
GB