Operating instructions

OPERATION
© Cafina / Melitta 5 - 22 OI c5 eng V9 / 18.08.2006
E
5.5.4 Refill milk
The description of the procedure below ap-
plies to both the installed EF milk cooler
and the external FC milk cooler.
! The installed EF milk cooler can option-
ally be fitted with a milk level monitoring
system.
1. The following message indicates that
there is either no milk or insufficient
milk or else that the milk container itself
is not inside the installed EF milk
cooler ...
2. Replenish milk supply. This will result
in the following message ...
3. Pull beverage outlet right down.
4. Open control panel cover and press the
[ $
] button.
A little milk will be released to fill the
lines.
5. You can now dispense beverages as
required.
NOTE
•
The milk container for the in-
stalled EF milk cooler holds ap-
prox. six litres of milk.
• If the installed EF milk cooler is
fitted with milk level monitor-
ing, then this will be activated
when the milk supply in the
milk container has dropped to
about 1 litre or when the milk
container is not in the installed
EF milk cooler.
• When replenishing the milk
supply, always cover the lip
seals of the milk cooler door of
the installed EF milk cooler.
• The milk used to replenish
the milk container must be
pre-cooled, i.e. it must not be
any hotter than 1 - 5 °C. If
hotter milk is used, the milk
will overheat when "milky
coffee" beverages are dis-
pensed, insufficient froth
will be created and it will not
be possible to comply with
the hygiene regulations.
• If the milk container is empty
when the machine comes to
dispense beverages that in-
clude milk, the c5 coffee maker
will dispense steam instead of
milk.
CAUTION
• If the milk container is emp-
ty:
the addition of steam in-
stead of milk to beverages
can result in splashing of hot
liquid, causing scalds.
• Replenish the milk supply
immediately.
Select beverage
Refill milk
Select beverage
Please wait