Operating instructions

ENGLISH

6.5 Preparing hot water

Prerequisite: The appliance must be ready for operation (see „Switching on

and off“ on page 12).

• Place a suitable vessel under the outlet.

• Press the button for hot water

→ Hot water will start dispensing. Dispensing ends automatically when the set

water quantity is reached.

• Turn the rotary switch to adjust the water quantity while the hot water is

being dispensed.

• To stop dispensing hot water before the programmed amount is

reached, press the hot water button

or the rotary switch.

6.6 Preparing beverages with ground coffee

Prerequisite: The appliance must be ready for operation (see „Switching on

and off“ on page 12).

• Open the lid of the ground coffee chute (Fig. A, No. 8).

• Fill a maximum of one coffee scoop of fresh ground coffee into the

ground coffee chute.

Caution!

– Fill the ground coffee chute with ground coffee only. Instant products can

clog up the brewing unit.

– Never pour in more than one coffee scoop (supplied with the appliance) of

groundcoffee,otherwisethebrewingunitwillbeoverlled.

• Close the lid of the ground coffee chute.

• Place a suitable vessel under the outlet.

• Press the button for the beverage you wish to prepare, e.g. the button

for café crème

→ Coffee dispensing now starts. It ends automatically when the set dispensed

quantity is reached.