Operating instructions
32
You can also rinse the milk unit in-between.
• Place a vessel below the outlet.
• Select the Care sub-menu.
• Turn the rotary switch until Easy Cleaning is
highlightedandpressittoconrmtheselection.
• Turn the rotary switch until Start is highlighted
and press it to start the programme.
• Connect the tube to the outlet and to the drip tray
(Fig. D).
• Presstherotaryswitchtoconrmthatthetubeis
connected.
→ The“EasyCleaning”programmewillstart.Waterthenowsoutoftheoutlet
and into the drip tray through the tube.
9.5 Cleaning the milk unit ("Intensive Cleaning"
programme)
With the “Intensive Cleaning” programme, the milk unit is cleaned thoroughly with a
cleaning agent.
Caution!
Only use the Melitta
®
milk system cleaning agent for fully automatic coffee
makers. This cleaning agent is specially designed for the Melitta
®
CAFFEO
®
CI
®
. The use of other cleaning agents can damage the appliance.
• If necessary, clean the milk tube and the milk
outlet opening with the enclosed cleaning brush.
• Place a vessel with at least 0.5 l capacity under
the outlet (e.g. the coffee grounds container).
• Select the Care sub-menu.
• Turn the rotary switch until Intensive Cleaning is
highlightedandpressittoconrmtheselection.
• Turn the rotary switch until Start is highlighted
and press it to start the programme.
Care
Easy Cleaning
Quick rinsing
Intensive Cleaning
Easy Cleaning
Start
Exit
Care
Intensive Cleaning
Easy Cleaning
Cleaning
Intensive Cleaning
Start
Exit