Operating instructions

38
16 Remove the tube from the drip tray.
17 Empty the drip tray and the coffee grounds container and then reinsert
them.
→ Theintegrateddescalingprogrammehasnished.Theapplianceisready
for operation.
10 Inserting, changing and removing the water
lter
A Melitta
®
Claris
®
waterlterissuppliedwiththeapplianceforlteringoutlimescale
andothercontaminants.Usingthelterhelpstoreducetherequiredfrequencyof
descaling. The service life of your appliance will be extended thanks to the reliable
protectionfromlimescale.Thewaterltershouldbechangedregularly,however;
atthelatest,whentheappliancepromptsyoutodoso.Whenthewaterlteris
inserted,changedorremoved,thismustbeconrmedinthe Filter sub-menu. Once
thewaterlterisinsertedorchanged,theapplianceresetsthewaterltercycleto
zeroandisabletopromptyoutochangethewaterlteragainattherighttime.
10.1 Inserting the water lter
Note
Putthewaterlterinaglasswithfreshtapwaterforseveralminutesbefore
you insert it.
• Select the Care sub-menu.
• Turn the rotary switch until Filter is highlighted
andpressittoconrmtheselection.
• Turn the rotary switch until Insert lter is
highlightedandpressittoconrmtheselection.
• Turn the rotary switch until Start is highlighted
andpressittoconrmtheselection.
• Flip up the lid of the water tank (Fig. A,
No. 6) and pull the water tank up and out of the
appliance.
Care
Filter
Descaling
Exit
Filter
Insert lter
Exit
Change lter