Operating instructions
ENGLISH
213
Warning!
Danger of burning and scalding from hot steam
The machine releases hot steam when it is vented. Never allow any part of
your body, e.g. your face to come into contact with the hot steam.
• Lift the lid of the water tank (Fig. A, No. 6) and
pull the water tank up and out of the appliance.
→ The appliance is vented. The appliance then
automatically switches off completely.
8.12 Adjusting grinding neness
Thegrindingnenesslevelwasoptimallyadjustedpriortodelivery.Consequently,
werecommendthatyouonlyreadjustgrindingnenessafterapproximately1,000
coffee preparation processes (about 1 year).
Youcanonlysetthegrindingneness while the mill is running. Thus, adjust
grindingnenessdirectlyaftercoffeedispensingstarts.
Ifthecoffeeavourisnotintenseenough,werecommendthatyousetaner
grinding level.
• Place the lever (Fig. B, No. 14) in one of the three positions
(as viewed from the rear of the appliance).
Lever position Grinding neness
Left Fine
Centre Medium
Right Coarse
(factory setting)
Venting
Remove
water tank