Operating instructions

4.5 Filling the water tank

• Flip up the lid of the water tank (Fig. A, No. 7) and pull the water tank

up and out of the appliance.

• Fill the water tank to the maximum mark with fresh tap water and

reinsert it.

Notes

If the water tank runs empty during operation (e.g. during the coffee dispensing

process), the symbol for the water tank will be illuminated. The current

operation will be stopped and the water tank must be  lled before starting a

new operation.

4.6 Venting

Caution!

The appliance may only be vented without the Melitta

Claris

water  lter and

with a full water tank.

– Insert the Melitta

Claris

water  lter into the water tank only after venting.

– Fill the water tank with fresh tap water to the max. mark before switching

the appliance on.

• Press the ON / OFF button to switch the appliance on.

→ The symbol for the valve then appears on the display. The appliance

must be vented through the Cappuccinatore to ensure that there is no more

air in the water passages.

• Place a large vessel under the Cappuccinatore.

• Turn the valve switch (Fig. A, No. 11) clockwise to the stop to open the

valve.

→ The valve symbol now  ashes. Water will  ow into the vessel under the

Cappuccinatore.

• When water is no longer dispensed and the symbol for the valve is

illuminated, turn the valve switch anti-clockwise to the stop to close the

valve.

→ The appliance is ready for operation.

Heft_SoloperfectMilk_EU.indd 54 13.12.2012 12:43:44