Operating instructions

ENGLISH
83
14 Troubleshooting
Fault Cause Measure
Coffee only ows
drop by drop.
Grinding neness is too
ne.
Set the grinding neness
coarser.
Clean the brewing unit.
Run the integrated descaling
programme, if necessary.
Run the integrated cleaning
programme, if necessary.
Coffee does not
ow.
Water tank not lled or
incorrectly inserted.
Fill the water tank and make
sure it is inserted correctly.
Open the valve until water
ows out of the appliance and
then close it again.
Brewing unit is
obstructed.
Clean the brewing unit
Grinder does not
grind the coffee
beans.
Beans do not drop into
the grinder (beans are
too oily).
Tap lightly on the bean
container.
Foreign objects in the
grinder
Call the hotline.
Loud grinder noise Foreign objects in the
grinder
Call the hotline.
The bean symbols
ash even
though the bean
container is full.
Insufcient quantity of
ground beans in the
brewing chamber
Press the button for coffee
dispensing
or coffee
strength
.
The valve symbol
illuminates out
of turn.
There is air in the lines
inside the appliance.
Open the valve until water
ows out of the appliance and
then close it again.
If necessary, clean the brewing
unit.
Not enough milk
froth is formed
during the frothing
process.
The control dial of the
Cappuccinatore is in the
wrong position.
Adjust the control dial to the
proper position.
The Cappuccinatore is
dirty.
Take the Cappuccinatore apart
and clean it (see page 72).
Heft_SoloperfectMilk_EU.indd 83 13.12.2012 12:43:58