Operating instructions

ENGLISH

Integrated Cleaning programme

The Integrated Cleaning programme removes residues, including coffee oil residues,

that cannot be eliminated by hand. It takes a total of approximately 15 minutes.

Prerequisite: The appliance must be switched off.

Caution!

Run the integrated cleaning programme every 2 months or after approx- –

imately 200 brewed cups of coffee, at the latest however run the pro-

gramme when the symbol for cleaning is illuminated in the display.

Only use Melitta –

cleaning tabs for automatic coffeemakers. These tabs

are precisely matched to the Melitta

SOLO

&milk. Use of other clean-Use of other clean-

ing agents can damage the appliance.

Run the Integrated Cleaning programme as follows:

Phase 1

During Phase 1, no bean symbols are shown on the display.

1 Pull the water reservoir up and out of the appliance. Fill the water reser-

voir to the Max. mark with fresh tap water and re-insert it.

2 Simultaneously press the button for coffee dispensing and the

On/Off button for longer than 2 seconds.

The cleaning symbol → will ash throughout the operation.

The symbol for the drip tray will be illuminated.

3 Empty the drip tray and the coffee grounds container.

4 Re-insert the drip tray without the coffee grounds container and place the

coffee grounds container under the outlet.

Phase 1 is completed. →