Operation Manual
Using the My Bean Select® function
24
ENGLISH
MY BEAN SELECT
Fill in single portion
Mount spoon
Fig. 15: Filling with coee beans for the My Bean Select® function
1. Remove the measuring spoon(2) from the bean chute(36).
» The My Bean Select message appears on the display with the requests
Fill with single portion of beans, put back the spoon.
2. Use the measuring spoon to ll a single portion of coee beans into the
bean chute(36).
3. Place the measuring spoon back onto the bean chute.
» The My Bean Select ready symbol with the Select beverage request
appear on the display.
4. Prepare any coee beverage.
Information
The measuring spoon is intended to help in lling the correct amount of
coee beans into the bean chute.
A full measuring spoon contains approx. 10 to 11 g of coee beans.
Depending on the desired coee strength, fewer coee beans can also
be lled.
If there are less than approx. 8g coee beans in the bean chute, the My
Bean Select® function is not activated. The My Bean Select ready symbol
does not appear on the display. The next time a coee is dispensed, the
coee beans from the bean chute are mixed with the coee beans from
the bean container.