Operation Manual

21
GB
Milk>>
Strength
Water volume
Chocolate>>
Strength
Water volume
Price
Chocolate>>
Strength
Water volume
Price
Instant coffee>>
Strength
Water volume
Price
Instant white coffee>>
Coffee>>
Strength
Water volume
Milk>>
Strength
Water volume
Price
Plunger coffee>>
Strength
Water volume
Price
Tea>>
Water volume
Price
Extra 1>>
Coffee>>
Coffee dosage
Coffee volume
Milk>>
Strength
Water volume
Milk froth>>
Strength
Water volume
Chocolate>>
Strength
Water volume
Price
Extra 2>>
Coffee>>
Coffee dosage
Coffee volume
Milk>>
Strength
Water volume
Milk froth >>
Strength
Water volume
Chocolate >>
Strength
Water volume
Price
Operating Parameter>>
Payment
General>>
Cleaning time
Time
Date
Summer time
Service
11. Connection and assembly
All MELITTA appliances are supplied ready for
connecting. Before installation, however, the on-
site water and electricity supplies should be
made easily accessible within a radius of one
metre from the machine.
These preparations must be carried out by aut-
horized specialists in accordance with na-tional
regulations. The MELITTA Customer Service
Department is not authorized to undertake such
work and cannot accept responsibility for the
installation.
The machine may only be installed in places
where it can be supervised by trained personnel.
The machine must be placed on a solid table top.
This table top may not be cleaned with a water
pipe or high-pressure cleaner. An opening of at
least 60 – 80 mm. ø must be provided in the cen-
tre below the machine to allow access to the
mains supplies.
a) Electric supply
The distribution voltage must conform with the
data indicated on the type plate. The mains lead
must be fuse-protected separately by the client.
The connection must be made by means of a
plug socket secured by a residual current oper-
ated device (max. 30 mA).
b) W
ater supply *)
A stop valve with backflow suppressor, accord-
ing to specifications, is to be installed within easy
access. If a water filter is used, this must be
mounted vertically. For safety reasons, the spe-
cial connecting hoses supplied with the machine
may not be shortened during assembly. The
dynamic water pressure must be at least 2.5 bar
at approx. 5 litre/minute. Should the pressure
exceed 6 bar (day/night fluctuations), a pressure
reducing valve must be inserted between the
machine and the main stop valve.
Before operating the machine for the first time,
the water filter must be activated with at least 20
C.
b. a.
mind. 650
Water filter