User Manual

58
• Turn the valve switch (Fig. A, No. 11) clockwise to the stop to open the
valve.
• The valve symbol
now  ashes. Water will  ow into the vessel under
the Cappuccinatore.
• When water is no longer dispensed and the symbol for the valve is
illuminated, turn the valve switch anti-clockwise to the stop to close the
valve.
→ Subsequently, the standby symbol
and bean symbols will be
illuminated. The device is ready for operation and water hardness is
automatically set to hardness level 1.
Notes
– The Melitta
®
Claris
®
water  lter should not remain dry over an extended
period of time. We therefore recommend storing the Melitta
®
Claris
®
water
 lter in the refrigerator in a glass of water when the appliance will not be in
use for extended periods.
– After inserting the Melitta
®
Claris
®
water  lter, excess active charcoal will
be washed out of the  lter the  rst time the appliance is rinsed out. This
can cause the rinse water to appear slightly grey in colour. Subsequently
the water will again be clear.