User Manual

74
Phase 1
During Phase 1, one bean symbol
is shown on the display.
→ First, two automatic rinsing processes are carried out.The standby symbol
will then be illuminated.
5 Reach into the recess on the right side of the appliance (Fig. A,
No. 12) and pull off the cover to the right.
6 Press and hold the red button on the handle of the brewing unit
(Fig. B, no. 1) and turn the handle clockwise to the stop (approximately
75°).
7 Use the handle to pull the brewing unit out of the appliance.
→ The standby symbol
and the symbol for cleaning will  ash
alternately, as long as the brewing unit is out of the machine.
Caution!
Danger of damaging the brewing unit
– During the cleaning programme, only remove the brewing unit when
instructed to do so.
8 Leave the brewing unit as it is (do not move or twist the components of
the brewing unit).
9 Thoroughly rinse off the entire brewing unit from all sides under running
water.
10 Let the brewing unit drip dry.
11 Place a cleaning tab in the brewing unit (Fig. C).
12 Reinsert the brewing unit into the appliance and turn the handle of the
brewing unit anticlockwise to the stop to lock.
→ Phase 1 is completed.