Operating Instructions
Table Of Contents
- 1 For your safety
- 2 Overview of the appliance
- 3 First steps
- 4 Basic operation
- 5 Preparing beverages
- 5.1 Preparing Espresso and Café Crème
- 5.2 Preparing Cappuccino
- 5.3 Preparing Latte Macchiato
- 5.4 Preparing milk foam and warm milk
- 5.5 Preparing hot water
- 5.6 Preparing beverages with recipes
- 5.7 Changing beverage settings before and during preparation
- 5.8 Stopping beverage preparation
- 5.9 Preparing two beverages simultaneously
- 6 Permanently changing beverage settings
- 7 Personal settings – "My Coffee"
- 8 Changing basic settings
- 9 Care and maintenance
- 10 Problems
- 11 Transport, storage and disposal
- 12 Technical data
Basic operation
65
ENGLISH
Information
ū The appliance switches o automatically when it is not operated for a
long time. Automatic rinsing is also carried out in this case.
ū The o time can be set in the Auto OFF menu, see chapter8.4 Setting
Auto OFF on page85.
ū If no beverage has been prepared since switching on or if the water tank
is empty, no rinsing takes place.
4.2 Using the control panel
The essential functions can be accessed using the control panel.
Press the button with a ngertip. The control panel does not react when
touched with a pen or other objects.
Only those buttons that can be used in the appliance's current status light
up.
Use the following actions to operate the control panel:
Brief press
Briey press a button to select a function.
Long press
Press a button for longer than 2 seconds to select a second
function that may be available.
Press "+" or "–"
Press "+" or "–" to increase or reduce the current value.
Hold a button down to change the value continuously.
Press the slider
Press the slider to select a value.
Pull the slider
Press and pull the slider to increase or reduce the current
value.