Operating Instructions
Table Of Contents
- 1 For your safety
- 2 Overview of the appliance
- 3 First steps
- 4 Basic operation
- 5 Preparing beverages
- 5.1 Preparing Espresso and Café Crème
- 5.2 Preparing Cappuccino
- 5.3 Preparing Latte Macchiato
- 5.4 Preparing milk foam and warm milk
- 5.5 Preparing hot water
- 5.6 Preparing beverages with recipes
- 5.7 Changing beverage settings before and during preparation
- 5.8 Stopping beverage preparation
- 5.9 Preparing two beverages simultaneously
- 6 Permanently changing beverage settings
- 7 Personal settings – "My Coffee"
- 8 Changing basic settings
- 9 Care and maintenance
- 10 Problems
- 11 Transport, storage and disposal
- 12 Technical data
Basic operation
72
ENGLISH
Connecting the milk hose (depending on the model)
14
6
38
36
Fig. 13: Connecting the milk hose to the appliance
1. Push down the outlet (6).
2. Connect the milk hose(36) to the connection at the outlet(14).
3. Insert the milk hose into a conventional milk pack(38).
4.9 Emptying the drip tray and coee grounds container
When the drip tray(8) and the coee grounds container(7) are full, the
appliance requests you to empty them. The projecting oat(17) also indi-
cates that the drip tray is full. Always empty both containers.
7
17
8
Fig. 14: Drip tray, coee grounds container and oat
1. Pull the drip tray(8) forwards out of the appliance.
2. Remove the coee grounds container(7) and empty it.
3. Empty the drip tray.
4. Insert the coee grounds container.
5. Push the drip tray into the appliance up to the stop.