Operating Instructions

Table Of Contents
Preparing beverages
75
ENGLISH
5.4 Preparing milk foam and warm milk
The preparation of milk foam and warm milk is similar.
Requirement: The ready symbol appears on the display and milk is
connected.
1. Place a vessel beneath the outlet.
2. Press the "Milk foam/milk" button.
a) Milk foam = briey press button
b) Warm milk = press button for longer (2 seconds)
» Milk dispensing begins.
» Beverage dispensing is ended automatically.
3. Remove the vessel.
» The display shows: Easy Cleaning? (OK for start).
4. You can execute the Easy Cleaning programme or prepare further
beverages.
a) Execute the Easy Cleaning programme. To do so, follow the instruc-
tions on the display. Information on this is available in chapter9.4
"Easy Cleaning" programme on page92.
b) Prepare further beverages and execute the Easy Cleaning programme
later.
» The ready symbol appears on the display.
5.5 Preparing hot water
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "Hot water" button.
» Hot water dispensing begins.
» Beverage dispensing is ended automatically.
3. Remove the vessel.
» The ready symbol appears on the display.
5.6 Preparing beverages with recipes
The following recipes are available (depending on the model):
Recipes without milk: Espresso, Ristretto, Lungo, Espresso doppio, Ristretto
doppio, Café Crème, Café Crème doppio, Americano, Americano extra shot,
Long Black, Red Eye, Black Eye, Dead Eye.
Recipes with milk: Cappuccino, Espresso Macchiato, Caè Latte, Café au
Lait, Flat White, Latte Macchiato, Latte Macchiato Extra Shot, Latte Mac-
chiato Triple Shot.