Operating Instructions
Table Of Contents
- 1 For your safety
- 2 Overview of the appliance
- 3 First steps
- 4 Basic operation
- 5 Preparing beverages
- 5.1 Preparing Espresso and Café Crème
- 5.2 Preparing Cappuccino
- 5.3 Preparing Latte Macchiato
- 5.4 Preparing milk foam and warm milk
- 5.5 Preparing hot water
- 5.6 Preparing beverages with recipes
- 5.7 Changing beverage settings before and during preparation
- 5.8 Stopping beverage preparation
- 5.9 Preparing two beverages simultaneously
- 6 Permanently changing beverage settings
- 7 Personal settings – "My Coffee"
- 8 Changing basic settings
- 9 Care and maintenance
- 10 Problems
- 11 Transport, storage and disposal
- 12 Technical data
Preparing beverages
76
ENGLISH
Information
When selecting a recipe with milk, connect the milk container or a commer-
cially available milk pack (depending on the model).
Direct starting of recipes is similar for all beverages. The selection of a
Lungo is described as an example here.
Recipes
Exit
Espresso
Ristretto
Lungo
Espresso doppio
Ristretto doppio
OK to start
Fig. 15: Direct start for a Lungo
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "My Coee/Recipes" button until the Recipes prole appears
and conrm with "menu/ok".
» The recipe selection appears on the display.
Alternatively, you can also press the "My Coee/Recipes" button for
2seconds to access the recipe selection directly.
3. Use the arrow buttons to select Lungo and conrm with "menu/ok".
» The grinding process and beverage dispensing start.
» Beverage dispensing is ended automatically.
4. Remove the vessel.
» The ready symbol appears on the display.
5.7 Changing beverage settings before and during
preparation
Beverage settings can be changed before and during beverage preparation.
Information
These settings only apply to current beverage preparation.
Changing beverage settings before preparation
The bean type, the total beverage amount and the coee strength can be
changed before selecting a beverage.