Operating Instructions
Table Of Contents
- 1 For your safety
- 2 Overview of the appliance
- 3 First steps
- 4 Basic operation
- 5 Preparing beverages
- 5.1 Preparing Espresso and Café Crème
- 5.2 Preparing Cappuccino
- 5.3 Preparing Latte Macchiato
- 5.4 Preparing milk foam and warm milk
- 5.5 Preparing hot water
- 5.6 Preparing beverages with recipes
- 5.7 Changing beverage settings before and during preparation
- 5.8 Stopping beverage preparation
- 5.9 Preparing two beverages simultaneously
- 6 Permanently changing beverage settings
- 7 Personal settings – "My Coffee"
- 8 Changing basic settings
- 9 Care and maintenance
- 10 Problems
- 11 Transport, storage and disposal
- 12 Technical data
Preparing beverages
77
ENGLISH
Before selecting a beverage, select a bean type with the "BEANSELECT"
button.
Before selecting a beverage, use the "Beverage amount" slider to set a
beverage amount.
Before selecting a beverage, use the "Coee strength" slider to set the
coee strength.
Information
ū When preparing Latte Macchiato and Cappuccino, the total beverage
amount is subdivided into a coee and a milk amount according to a
specied ratio.
ū If a beverage is not prepared within 1 minute, the appliance switches to
the default settings.
Changing beverage settings during preparation
The beverage amount and the coee strength can be changed during
beverage preparation.
During beverage dispensing (coee or milk), use the "Beverage amount"
slider to set the relevant beverage amount.
During the grinding process, use the "Coee strength" slider to set the
coee strength.
5.8 Stopping beverage preparation
To stop beverage preparation prematurely, press the selected direct key
again.