Operating Instructions
Table Of Contents
- 1 For your safety
- 2 Overview of the appliance
- 3 First steps
- 4 Basic operation
- 5 Preparing beverages
- 5.1 Preparing Espresso and Café Crème
- 5.2 Preparing Cappuccino
- 5.3 Preparing Latte Macchiato
- 5.4 Preparing milk foam and warm milk
- 5.5 Preparing hot water
- 5.6 Preparing beverages with recipes
- 5.7 Changing beverage settings before and during preparation
- 5.8 Stopping beverage preparation
- 5.9 Preparing two beverages simultaneously
- 6 Permanently changing beverage settings
- 7 Personal settings – "My Coffee"
- 8 Changing basic settings
- 9 Care and maintenance
- 10 Problems
- 11 Transport, storage and disposal
- 12 Technical data
Personal settings – "MyCoee"
82
ENGLISH
7.2 Selecting/Changing personal settings
Depending on the beverage, the following settings can be assigned to a
user:
ū Recipes: Selection of recipes,
ū Coee amount: Amount in millilitres
ū Foam amount: Amount in millilitres
ū Milk amount: Amount in millilitres
ū Hot water amount: Amount in millilitres
ū Beans: Bean chamber 1 or 2
ū Coee strength: Very mild, mild, normal, strong, very strong
ū Temperature: Low, normal, high
The assignment of personal settings to a user is always similar. Setting the
coee amount for a Cappuccino is described here as an example.
My coffee
--1--
Cappuccino
Exit
Recipes
Coffee amount
Froth amount
Beans
Coffee strength
Temperature
Fig. 20: Changing personal settings
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the My Coee menu.
3. Use the arrow buttons to select a user and conrm with "menu/ok".
4. Navigate to the Cappuccino > Coee amount menu.
5. Use the arrow buttons to select an amount and conrm with "menu/ok"
6. Repeatedly select the Exit command to exit the menu.
» The ready symbol appears on the display.
» The next time a Cappuccino is prepared by the user, the selected
amount of coee is used.