Operating Instructions
Table Of Contents
- 1 For your safety
- 2 Overview of the appliance
- 3 First steps
- 4 Basic operation
- 5 Preparing beverages
- 5.1 Preparing Espresso and Café Crème
- 5.2 Preparing Cappuccino
- 5.3 Preparing Latte Macchiato
- 5.4 Preparing milk foam and warm milk
- 5.5 Preparing hot water
- 5.6 Preparing beverages with recipes
- 5.7 Changing beverage settings before and during preparation
- 5.8 Stopping beverage preparation
- 5.9 Preparing two beverages simultaneously
- 6 Permanently changing beverage settings
- 7 Personal settings – "My Coffee"
- 8 Changing basic settings
- 9 Care and maintenance
- 10 Problems
- 11 Transport, storage and disposal
- 12 Technical data
Personal settings – "MyCoee"
83
ENGLISH
7.3 Preparing beverages with personal settings
The preparation of beverages using the "My Coee" function is similar for
all beverages. The preparation of a Cappuccino is described here as an
example.
Requirement: The ready symbol appears on the display and milk is
connected.
1. Place a vessel beneath the outlet.
2. Press the "My Coee" button until the desired user is shown on the
display.
3. Press the "Cappuccino" button.
» The grinding process and coee dispensing start.
» Coee dispensing is ended automatically.
» Milk dispensing begins.
» Beverage dispensing is ended automatically.
4. Remove the vessel.
» The display shows: Easy Cleaning? (OK for start).
5. You can execute the Easy Cleaning programme or prepare further
beverages.
a) Execute the Easy Cleaning programme. To do so, follow the
instructions on the display. Information on this is available in
chapter9.4 "Easy Cleaning" programme on page92.
b) Prepare further beverages and execute the Easy Cleaning programme
later.
» The ready symbol appears on the display.
Information
ū To exit the "MyCoee" function, press the "My Coee" button until the
ready symbol appears.
ū If a beverage is not prepared within 3 minutes, the appliance automati-
cally switches to the ready symbol.