Operating Instructions
Table Of Contents
- 1 For your safety
- 2 Overview of the appliance
- 3 First steps
- 4 Basic operation
- 5 Preparing beverages
- 5.1 Preparing Espresso and Café Crème
- 5.2 Preparing Cappuccino
- 5.3 Preparing Latte Macchiato
- 5.4 Preparing milk foam and warm milk
- 5.5 Preparing hot water
- 5.6 Preparing beverages with recipes
- 5.7 Changing beverage settings before and during preparation
- 5.8 Stopping beverage preparation
- 5.9 Preparing two beverages simultaneously
- 6 Permanently changing beverage settings
- 7 Personal settings – "My Coffee"
- 8 Changing basic settings
- 9 Care and maintenance
- 10 Problems
- 11 Transport, storage and disposal
- 12 Technical data
Changing basic settings
87
ENGLISH
8.6 Resetting the appliance to the factory settings
The appliance can be reset to the factory settings.
Information
If the appliance is reset to the factory settings, all personal settings are lost,
including the settings in the My Coee menu.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the System > Factory settings menu.
3. Use the arrow buttons to select Reset and conrm with "menu/ok".
4. Repeatedly select the Exit command to exit the menu.
» The ready symbol appears on the display.
8.7 Displays in the System menu
The System menu provides information on the status of the appliance.
The information can be accessed via the System > Statistics menu and the
System > SW version menu. Press the "menu/ok" button to exit the menus.
The following table provides an overview of the information content.
Menu Information
Statistics
Beverages Number of beverages prepared since starting up.
Brewing unit cleaning Number of cleaning processes performed.
Descaling Number of descaling processes performed.
Progress bars These show the number of beverages that can still be
prepared until the appliance requests you to perform
cleaning or descaling.
SW version
MAIN XXXXXXXXXXX Installed software version.