Operating Instructions
Table Of Contents
- 1 For your safety
- 2 Overview of the appliance
- 3 First steps
- 4 Basic operation
- 5 Preparing beverages
- 5.1 Preparing Espresso and Café Crème
- 5.2 Preparing Cappuccino
- 5.3 Preparing Latte Macchiato
- 5.4 Preparing milk foam and warm milk
- 5.5 Preparing hot water
- 5.6 Preparing beverages with recipes
- 5.7 Changing beverage settings before and during preparation
- 5.8 Stopping beverage preparation
- 5.9 Preparing two beverages simultaneously
- 6 Permanently changing beverage settings
- 7 Personal settings – "My Coffee"
- 8 Changing basic settings
- 9 Care and maintenance
- 10 Problems
- 11 Transport, storage and disposal
- 12 Technical data
Changing basic settings
89
ENGLISH
8.9 Converting the connection for the milk hose
The milk hose can be connected on the left or right side of the outlet.
40
41
42
42
39
6
42
42
Fig. 22: Turning the inlet
Proceed as follows to convert the outlet:
1. Pull the milk hose o the appliance.
2. Push the outlet (6) down as far as it will go.
3. Press the locking mechanism(42) of the milk unit(39) together using
two ngers of one hand and pull the milk unit downwards o the outlet.
4. Pull the milk distributor(40) upwards out of the milk unit.
5. Turn the inlet (41) by 180°.
Installation is carried out as described in reverse order.
Information
To install, push the milk unit(39) onto the outlet (6) with both hands. Make
sure that the locking mechanism(42) audibly engages on both sides.