Operating Instructions
Table Of Contents
- 1 For your safety
- 2 Overview of the appliance
- 3 First steps
- 4 Basic operation
- 5 Preparing beverages
- 5.1 Preparing Espresso and Café Crème
- 5.2 Preparing Cappuccino
- 5.3 Preparing Latte Macchiato
- 5.4 Preparing milk foam and warm milk
- 5.5 Preparing hot water
- 5.6 Preparing beverages with recipes
- 5.7 Changing beverage settings before and during preparation
- 5.8 Stopping beverage preparation
- 5.9 Preparing two beverages simultaneously
- 6 Permanently changing beverage settings
- 7 Personal settings – "My Coffee"
- 8 Changing basic settings
- 9 Care and maintenance
- 10 Problems
- 11 Transport, storage and disposal
- 12 Technical data
Care and maintenance
90
ENGLISH
9 Care and maintenance
Regular cleaning and maintenance ensure the consistent high quality of
your beverages.
9.1 General cleaning
Clean the appliance regularly. Immediately remove external soiling caused
by milk and coee.
ATTENTION
The use of unsuitable cleaning agents can lead to scratched surfaces.
Do not use any abrasive cloths, sponges or cleaning agents.
Requirement: The appliance is switched o.
Clean the outside of the appliance with a soft, damp cloth and normal
washing-up liquid.
Rinse the drip tray and the coee grounds container with a soft, damp
cloth and normal washing-up liquid.
Clean the bean container with a soft, dry cloth.
9.2 Rinsing the coee system
During rinsing, the nozzles at the outlet and the internal parts of the coee
system are rinsed. As a result, rinsing water from the interior enters the drip
tray.
When switching on and o, the appliance rinses the coee system.
Rinsing can also be carried out manually.
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
3. Navigate to the Care > Rinsing menu.
4. Use the arrow buttons to select Start and conrm with "menu/ok".
» The coee system is rinsed.
» The ready symbol appears on the display.