Operating Instructions
Table Of Contents
- 1 For your safety
- 2 Overview of the appliance
- 3 First steps
- 4 Basic operation
- 5 Preparing beverages
- 5.1 Preparing Espresso and Café Crème
- 5.2 Preparing Cappuccino
- 5.3 Preparing Latte Macchiato
- 5.4 Preparing milk foam and warm milk
- 5.5 Preparing hot water
- 5.6 Preparing beverages with recipes
- 5.7 Changing beverage settings before and during preparation
- 5.8 Stopping beverage preparation
- 5.9 Preparing two beverages simultaneously
- 6 Permanently changing beverage settings
- 7 Personal settings – "My Coffee"
- 8 Changing basic settings
- 9 Care and maintenance
- 10 Problems
- 11 Transport, storage and disposal
- 12 Technical data
Care and maintenance
92
ENGLISH
9.4 "Easy Cleaning" programme
The milk system is rinsed using the "Easy Cleaning" programme.
Each time after preparing a beverage with milk, the appliance requests you
to execute the "Easy Cleaning" programme.
The "Easy Cleaning" programme can also be run manually.
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
3. Navigate to the Care > Easy Cleaning menu.
4. Use the arrow buttons to select Start and conrm with "menu/ok".
5. Follow the further instructions on the display up to the end of the "Easy
Cleaning" programme.
» The ready symbol appears on the display.
9.5 "Cleaning milk system" programme
This programme is used to clean the milk system with the aid of a milk
system cleaning agent.
To maintain hygiene and avoid damage to the appliance, we recommend
carrying out the cleaning programme once a week.
The cleaning programme takes approximately 3 minutes and should not be
interrupted.
ATTENTION
The use of unsuitable milk system cleaning agents can damage the
appliance.
Only use Melitta® PERFECT CLEAN Espresso Machines milk system
cleaning agent.