Operating Instructions

Table Of Contents
Care and maintenance
94
ENGLISH
Proceed as follows to remove the milk unit:
1. Pull the milk hose o the appliance.
2. Push the outlet (6) down as far as it will go.
3. Press the locking mechanism (42) of the milk unit(39) together using
two ngers and pull the milk unit downwards o the outlet.
4. Pull the milk distributor (40) upwards out of the milk unit.
5. Pull the inlet (41) out upwards.
6. Clean the individual parts with warm water. Use the enclosed cleaning
brush, a soft, damp cloth and normal washing-up liquid.
Installation is carried out as described in reverse order.
Information
To install, push the milk unit(39) onto the outlet (6) using both hands. Make
sure that the locking mechanism(42) audibly engages on both sides.
9.6 "Cleaning coee system" programme
This cleaning programme is used to remove residues and coee oil residues
with the aid of coee machine cleaning agents.
To avoid damage to the appliance, we recommend carrying out the clean-
ing programme every 2 months or as requested by the appliance.
The cleaning programme takes approximately 15 minutes and should not
be interrupted.
CAUTION
Contact with coee machine cleaning agent may lead to eye and skin
irritation.
Observe the processing instructions on the packaging of the coee
machine cleaning agent.
ATTENTION
The use of unsuitable coee machine cleaning agents can damage the
appliance.
Only use Melitta® PERFECT CLEAN Espresso Machines cleaning tablets.