Operating Instructions
Table Of Contents
- 1 For your safety
- 2 Overview of the appliance
- 3 First steps
- 4 Basic operation
- 5 Preparing beverages
- 5.1 Preparing Espresso and Café Crème
- 5.2 Preparing Cappuccino
- 5.3 Preparing Latte Macchiato
- 5.4 Preparing milk foam and warm milk
- 5.5 Preparing hot water
- 5.6 Preparing beverages with recipes
- 5.7 Changing beverage settings before and during preparation
- 5.8 Stopping beverage preparation
- 5.9 Preparing two beverages simultaneously
- 6 Permanently changing beverage settings
- 7 Personal settings – "My Coffee"
- 8 Changing basic settings
- 9 Care and maintenance
- 10 Problems
- 11 Transport, storage and disposal
- 12 Technical data
Care and maintenance
95
ENGLISH
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the Care > Coee system cleaning menu.
3. Use the arrow buttons to select Start and conrm with "menu/ok".
4. Follow the further instructions on the display up to the end of the clean-
ing programme.
» The ready symbol appears on the display.
9.7 "Descaling" programme
The descaling programme is used to remove limescale deposits in the inte-
rior of the appliance with coee machine descaling agents.
To avoid damage to the appliance, we recommend carrying out the descal-
ing programme every 3 months or as requested by the appliance.
The descaling programme takes approximately 25 minutes and should not
be interrupted.
CAUTION
Contact with descaling agent may lead to eye and skin irritation.
Observe the processing instructions on the packaging of the descaling
agent.
ATTENTION
The use of unsuitable descaling agents can damage the appliance.
Only use Melitta® ANTI CALC Espresso Machines liquid descaling agent.
ATTENTION
A water lter may be damaged if it is screwed in during the descaling
programme.
Remove the water lter when the appliance requests you to do so
(seeFig. 25 Screwing/Unscrewing the water lter on page97).
Place the water lter into a vessel lled with tap water during the desca-
ling programme.
The water lter can be reinserted and reused when the descaling pro-
gramme is complete.