Operating Instructions
Table Of Contents
- 1 For your safety
- 2 Overview of the appliance
- 3 First steps
- 4 Basic operation
- 5 Preparing beverages
- 5.1 Preparing Espresso and Café Crème
- 5.2 Preparing Cappuccino
- 5.3 Preparing Latte Macchiato
- 5.4 Preparing milk foam and warm milk
- 5.5 Preparing hot water
- 5.6 Preparing beverages with recipes
- 5.7 Changing beverage settings before and during preparation
- 5.8 Stopping beverage preparation
- 5.9 Preparing two beverages simultaneously
- 6 Permanently changing beverage settings
- 7 Personal settings – "My Coffee"
- 8 Changing basic settings
- 9 Care and maintenance
- 10 Problems
- 11 Transport, storage and disposal
- 12 Technical data
Care and maintenance
96
ENGLISH
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the Care > Descaling menu.
3. Use the arrow buttons to select Start and conrm with "menu/ok".
4. Follow the further instructions on the display up to the end of the desca-
ling programme.
» The ready symbol appears on the display.
9.8 Setting the water hardness
The set water hardness inuences the frequency of descaling. The harder
the water, the more frequently the appliance has to be descaled.
Information
The water hardness cannot be set if you use a water lter (see chapter9.9
Using a water lter on page97).
Determine the water hardness with the enclosed test strip. Observe the
instructions on the test strip packaging and in Table Water hardness range
on page101.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the Water hardness menu using the arrow buttons.
3. Use the arrow buttons to select the water hardness range and conrm
with "menu/ok".
4. Exit the menu with the Exit command.
» The ready symbol appears on the display.