User`s guide
Note:
The light body will be extremely hot in10W mode.
If the temperature of light body has been 90ºC,
the light will turn to 5W mode automatically after
blinking 6 times. Press the power-controller twice
to return to 10W mode.
POWER AND SAFETY TIME RESERVE TANK INDICATORS
WhiteLite
™
HP Mega 10W includes a Safety Time Reserve tank that
provides up to 30 minutes of additional burn time at 2.6W. The light
will shut off automatically after RED power-indicator blinks for 1
minute. For continued use, charge the battery or use a spare battery.
Note:
Battery run times are approximate. Run times will vary due
to usage patterns, temperature, and battery condition.
POWERPACK OPERATION
* Standard Operating Temperature: 15˚C~25˚C (59˚F~77˚F)
Run-time reference: 3 hours at 10W in fully-charged condition.
In order for the battery pack to determine the correct light unit, the battery must be securely connected to the light unit before
being turned on. Press and hold the power controller for 3 seconds to turn on the light. Choose your desired power level by pressing
the power controller.
Note:
In case light does not turn on, retry turning on the light.
If the ambient temperature is extremely high or low (even within
the operating temperature range), the operating time may be
shorter than the standard time due to characteristics of the battery.
Shut
off
10W
App. 180 min
Blinking App. 1 min Blinking App. 1 min
Total Burn Time at
10W
3.5
hours
Shut
off
5W
App. 360 min
Blinking App. 1 min Blinking App. 1 min
Total Burn Time at
5W
6.5
hours
Shut
off
Total Burn Time at
2.6W
24
hours
Off
Power Controller
Press and hold
for 3 seconds
to turn on or off
2.6W S.T. Reserve
App. 30 min
2.6W S.T. Reserve
App. 30 min
2.6W S.T. Reserve
App. 30 min
Blinking
App. 1410 min
Blinking
3 times
Blinking
6 times
Blinking
6 times
Blinking
3 times
DON'T TOUCH
The light body is
extremely hot in
10W mode and may
cause bodily injury
if touched.
G
B
3
10 W
5 W
Blinking
Blue
Green
Red
1
2
3
Power Level
LEDMode
3 hrs.
6 hrs.
24 hrs.
Total Run Time
HANDLEBAR MOUNT
ACCESSORIES FOR MOUNTING ON HANDLEBAR
MAIN UNITS
3-2
3-2a
3-2b
1-1 1-2
2-1 2-3
1-3
4
ACCESSORIES FOR MOUNTING ON H/BAR
4. Triangle Rubber Pad
5. Rubber Strap Unit
5-1 Rubber Strap x 2 (for ø 22.2~ø 25.4)
5-2 Rubber Strap x 2 (for ø 25.4~ø 31.8)
6. Cable Unit
6-1 Extension Cable
6-2 Socket
6-3 Connecting Plug
MAIN UNITS
1. Light Unit (#TMS-SP68)
1-1 Light Body
1-2 Power-Controller
1-3 Battery Pack Connecting Plug
1-4 M3 bolt
1-5 Handlebar Bracket
2. Battery Pack (#TMS-SP67)
2-1 Socket
2-2 Battery with Velcro Strap
2-3 Rubber Pad
3. Charger
3-1 Power Cord
3-2 Battery Charger (#TMS-SP69)
3-2a Socket
3-2b Battery Pack Connecting Plug
3-1
ACCESSORIES FOR MOUNTING ON HELMET
9. HELMET LIGHT BRACKET Unit (#TMS-SP36)
9-1 Light Holder
9-2 Helmet Band
9-3 Velcro Strap x 2 pcs
10. Cable Unit
10-1 Extension Cable
10-2 Socket
10-3 Connecting Plug
2-2
1-5
1-4
6-36-1
6-2
5-2
DETAILED PARTS DESCRIPTION
5-1
ACCESSORIES FOR MOUNTING ON HELMETHELMET MOUNT
9-2
10-1
9-3
10-2
10-3
9-1
G
B
2
BATTERY MOUNT
ACCESSORIES FOR MOUNTING ON BATTERY
7
ACCESSORIES FOR MOUNTING ON BATTERY
7. BATTERY LIGHT BRACKET
8. Adjusting Nut (Additional)
8
Blinking App. 1 min
Blinking
6 times