User manual

ConnectX®-3 Ethernet Single and Dual QSFP+ Port Adapter Card User Manual Rev 1.7
Mellanox Technologies
7
Revision History
This document was printed on November 14, 2012.
Table 1 - Revision History Table
Date Rev
Comments/Changes
November 2012 1.7 • Updated Web links in the following locations:
October 2012 1.66 •Fixed Table 5, “Jumper Configuration,” on page 17
• Updated figures in Section 4.1.2, “Windows,” on page 24 by pro-
viding ConnectX-3 examples
August 2012 1.5 • Added operational and non-operational temp
erature and humid-
ity level to the following tables:
May 2012 1.4 • Removed “Blinking indicates a prob
lem with the physical link”
from Table 4, “Physical and Logical Link Indication,” on
page 16
April 2012 1.3 • Updated power numbers in Table 7, “MCX313A-BCBT Specifi-
cations Table,” on page 30 and Table 8, “MCX314A-BCBT
Specifications Table,” on page 31
January 2012 1.2 • Minor edits
• Updated LED functions in Section 2.1.3, “LED Assignment,” on
page 16
• Formatted specification tables in Appendix A, “Specifications,”
on page 30
October 2011 1.1 Added new OPNs based on Conn
ectX-3 Step A1 devices
July 2011 1.0 Minor edits
July 2011 0.10 First Release
- Section 4.3.1, “Hardware and Software
Requirements,” on
page 27
- Table 7, “MCX313A-BCBT Specifications Table,” on page 30
- Table 8, “MCX314A-BCBT Specifications Table,” on page 31
- Table 7, “MCX313A-BCBT Specifications Table,” on page 30
- Table 8, “MCX314A-BCBT Specifications Table,” on page 31