Specifications

True Scale Fabric OFED+ Host Software
February 2014 RN 7.2.2.0.8
Order Number: H31512002US 11
OFED+ Host SW
1.8 Hardware Supported
Table 4 list the hardware supported in this release.
1.9 Installation Requirements
1.9.1 Software and Firmware Requirements
All Intel IB software on a given node must be at a compatible release level. Each
distribution of the Intel IB Installation Wrapper will have a qualified and compatible
version of each Intel IB Software component. Prior to installing Intel IB Software, any
versions of the Silverstorm IB stack (and any other vendor's IB stack) must be
uninstalled.
1.9.2 Installation Instructions
Note: An upgrade from Intel
®
True Scale Fabric OFED+ Host Software 7.1 or later may be
performed in which case the installation will detect the existing installation and
properly upgrade existing installed components and shall be removing components
which are no longer supported.
Note: Any versions of an older IB stack must be uninstalled first. If you are downgrading from
a newer IntelIB release to an older IntelIB or InfiniServ release, the newer IntelIB
release must be stopped and uninstalled, prior to installing the older release. The
newer IntelIB must be uninstalled using the
iba_config tool or the ./INSTALL tool
provided with the newer IntelIB release.
Note: The installation process attempts to uninstall any existing 3rd party versions of OFED,
however some packagings of OFED may not be completely uninstalled. If using a 3rd
party OFED installation, it is recommended to uninstall it prior to installing IntelIB.
Table 4. Hardware Supported
HCAs
QLE7340
QLE7342
QME7342
QME7362
QMH7342
MHQH29-*
MHQH19-*
MHQH19B-XTR
MHQH29B-XTR
MHQH29B-XSR
MCX354A-QCAT
MCX353A-QCAT
NC543i (HP SL390 G7 in-built InfiniBand Host Channel Adapter)
CX-3 LOM down QDR
46M2199
46M2203