User manual

SwitchX®-2 12 Port Ethernet Switch System Hardware User Manual Rev 1.0
Mellanox Technologies
43
•SSH
•Telnet
•Web
•SNMP
•XML
 To Start an SSH Connection to the Switch perform the following steps:
1. Set up an Ethernet connection between the switch and a local network machine (“the remote
machine” henceforth) using a standard RJ-45 connector.
2. Connect to the remote machine (rem_mach1 is used as an example).
3. Start a remote shell to the switch using the following command: 
<switch_IP_address> is the IP address of the switch.
4. You can enter any supported command now.
For additional information on the MLNX-OS refer to MLNX-OS User Manual and
MLNX-OS Command Reference Guide located on Mellanox support web.
rem_mach1 > ssh -l <username> <switch ip address>
Mellanox MLNX-OS® Switch Management
Password:
Last login: March 13, 2013 from 192.168.10.1
Mellanox Switch
switch >