User manual

SwitchX®-2 12 Port InfiniBand Switch System Hardware User Manual Rev 1.0

Mellanox Technologies

3. Over-temperature

4. Stacking the Chassis

5. Double Pole/Neutral Fusing

6. Multiple Power Inlets

7. During Lightning - Electrical Hazard

8. Copper Cable Connecting/Disconnecting

9. Rack Mounting and Servicing

This equipment should not be operated in an area with an ambient temperature

exceeding the maximum recommended: 45°C (113°F). Moreover, to guarantee

proper air flow, allow at least 8cm (3 inches) of clearance around the ventilation

openings.

The chassis should not be stacked on any other equipment. If the chassis falls, it can

cause bodily injury and equipment damage.

This system has double pole/neutral fusing. Remove all power cords before opening

the cover of this product or touching any internal parts.

Risk of electric shock and energy hazard.

The PSUs are all independent.

Disconnect all power supplies to ensure a powered down state inside of the switch

platform.

During periods of lightning activity, do not work on the equipment or connect or dis-

connect cables.

Copper cables are heavy and not flexible, as such they should be carefully attached to

or detached from the connectors. Refer to the cable manufacturer for special warn

ings/instructions.

When this product is mounted or serviced in a rack, special precautions must be taken

to ensure that the system remains stable. In general you should fill the rack with

equipment starting from the bottom to the top.