User manual

SwitchX®-2 12 Port InfiniBand Switch System Hardware User Manual Rev 1.0
Mellanox Technologies
63
Appendix F: Disassembly of the Switch from the Rack
F.1 Disassembly Procedure
 To disassemble the switch from the rack:
1. Unplug and remove all connectors.
2. Unplug the power cord.
3. Remove the ground wire.
4. Remove the switch by unscrewing the thumb nuts and slide the switch out of the frame.
5. Slide the switch from the rack.
6. Remove the 10 screws holding the frame.
7. Remove the frame from the rack.
F.2 Disposal
Follow the instructions found in the Mellanox Web site at mellanox.com for proper instructions
to disassemble and dispose of the Switch according to the WEEE directive.
According to the WEEE Directive 2002/96/EC, all waste electrical and electronic
equipment (EEE) should be collected separately and not disposed of with regular
household waste.
Dispose of this product and all of its parts in a responsible and environmentally
friendly way.