turbo glide c s steam iron 2 2 0 0 W Model: 23465 PLEASE READ ALL INSTRUCTIONS BEFORE USE 23465_IM.
Dear customer, Many thanks for choosing to purchase a Mellerware brand product. Its technology, design and operation and the fact that it exceeds the strictest quality standards, ensures it will give you full satisfaction for a very long time. Description A Spray button B Steam blast button C Steam setting control D Self-cleaning button E Spray nozzle F Filling hole G Base H Temperature gauge I Iron ready pilot light B A C F E H I D G Fig. 1 23465_IM.
Safety advice and warnings - Read these instructions carefully before switching the appliance on and keep them for future consultation. Failure to follow and observe these instructions may result in an accident. - Some parts of the iron have been lightly greased, so the iron may produce a little smoke when plugged in for the first time. This will stop after a short period of time. - Before using the iron for the first time, remove the plastic cover from the base and clean the base with a soft cloth.
- Stand the iron upright and press the plug it in. - Turn the temperature gauge to the ***position. - Let the iron heat up until the pilot light goes off and comes back on again. - Unplug the iron and place it over the sink. - Push the self-cleaning button (D) and keep it pushed down. - Let the water flow out through the steam vents in the base, while lightly shaking the iron. - Release the self-cleaning button after a moment or when the tank has emptied and place the iron in an upright position.
23465_IM.