User manual

OPERATING INSTRUCTIONS
Your new food processor will help you to prepare
a lot of basic mixtures that you can use for your
recipes.
Please abide by the following instructions to
achieve the best results and to keep your
appliance in good working condition.
Attention! Never exceed the maximum
quantities below and never pour liquids hotter
than 75°C into the bowl and/or blender
Follow the instructions given below every time you
use it:
- Never leave the appliance unattended while it is
on.
- Never make the appliance work while it is empty.
- Never touch the moving parts.
- Never put your fingers or utensils inside the lid
opening.
- Never press down the ingredients into the lid
opening with your hands.
- Do not use the appliance to work hard ingredients
(e.g, frozen meat, crusts of cheese…), rubbery
(e.g.candied peel…), uneatable parts of
ingredients (e.g. bones,, fishbones…)or crush ice.
- Do not remove the lid and never replace
accessories without switching off the appliance
and if the accessory being used has not stopped
working.
- Do not remove the ingredients from the bowl
before removing the blade
A: Mixing Bowl
I. Chopping Function
- put the protect cover onto the body tightly ,as
shown in Diagram 1
- put the plastic bowl on power unit and turn
the handle in clock-wise direction, as shown in
Diagram 2 & 3
- Put the blade support on the axis in the middle of
the bowl, and press it to the bottom. Then fix the
chopping blade to the blade support, as shown in
Diagram 4 & 5.
Warning: The blade is sharp. Please only hold the
plastic part while using.
- Put the food (eg. Meet) into the bowl, as shown
in Diagram 6. Big piece food needs to be cut into
small pieces. ( 2 cm x 2 cm x 2 cm).
- Put the cover on the bowl, and turn it until hearing
the chattering sound, as shown in Diagram7.
- Fix the plug to the electric socket, Turn the knob
to the required level, as shown in Diagram 8.
(The speed is increased by levels. PULSE is the
highest level . Turn the knob to the PULSE for any
intermittent operation. )
- When the chopping is finished, Turn the knob
to the “0”. After the blade stops, pour out the
food.
II. Whisking Function
Mixing function has almost the same operating
steps as chopping function. Only change the
chopping blade to shredding blade. It is used for
mixing and whisking of food, eg, egg, soup.