E X I C E E C M A S T E R complies with INTERNATIONAL IEC60335 SAFETY SPECIFICATIONS U 100W T I C E I V E M A K E R Model: ICM001A PLEASE READ ALL INSTRUCTIONS BEFORE USE 2 year guarantee MW_ICM001A_IM.
Dear Customer, Many thanks for choosing to purchase a Mellerware brand product. Thanks to its technology, design and operation and the fact that it exceeds the strictest quality standards, a fully satisfactory use and long product life can be assured. It is important that you read these instructions before using your portable ice maker and keep them in a safe place for future reference. GETTING TO KNOW YOUR UNIT GENERAL: 1 - Ice lifter. 2 - Ice full sensor. 3 - Ice basket.
PREPARING YOUR ICE MAKER FOR USE When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons or property. Read all instructions before using any appliance. SAFETY ADVICE: - Do not operate this appliance with a damaged power cord. If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
refrigerated cold water. WARNING: fill with fresh clean water only. CONNECTING YOUR ICE MAKER: *If the plug, power cord or appliance is damaged in any way, please return the unit to the manufacturer or their designated service agents to avoid the risk of electric shock or injury. 1. This unit should only be used in a single standard wall socket. Ensure that the plug fits securely and correctly into the wall socket.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION “Add Water” Little water in water indicator is on. reservoir. “Ice Full” indicator The ice basket is full. is on. Ice cubes stick The ice making cycle is too together. long. Water temperature in inner tank is too low. Ice making cycle is Room or water temperature normal but no ice in inner tank is too high. formed. Refrigerant in cooling system may be leaking.
MW_ICM001A_IM.