E X E C U T I V E B R A V I S S I M O I I P R O - S T E A M S TAT I O N complies with INTERNATIONAL IEC60355 SAFETY SPECIFICATIONS 2100W Model: 23810 PLEASE READ ALL INSTRUCTIONS BEFORE USE 2 year guarantee MW_EX_23810_BRAVISSIMO_PRO 2_IM.
Dear Customer, thank you for having decided to purchase an appliance from the Mellerware range. The design, features and technology of this appliance as well as the strict quality controls used during manufacture will provide full satisfaction for many years. The packing materials used for this appliance are part of a pick-up, sorting and recycling system. If you wish to discard them, please use the public containers provided for each kind of material. Description A Iron on/off switch.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 6 MW_EX_23810_BRAVISSIMO_PRO 2_IM.indd 3 Fig.
Tips and safety warnings -This appliance is not intended for use by persons(including children)with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. -Children should be supervised to ensure that they do not play with the appliance. -Please read these instructions carefully before using the appliance and keep them for future reference.
Thermostat control position Type of fabric Steam • Nylon / Silk No •• Wool No ••• Cotton, Linen Yes It is recommended not to use steam in the • and •• thermostat positions, as water could drip. -Set the desired temperature with the thermostat control (J), depending on the type of cloth to be ironed (Fig. 3). -The appliance will be ready for use when the pressure indicator LED (E) lights up (Fig. 4). While ironing, this LED (E) goes on and off automatically, this is normal.
Breakdowns and repairs Breakdowns and repairs In the event of any breakdown, check the following chart. - In the event of malfunctions, take the appliance to an authorized Technical Support Service. - Do not try to dismantle or repair it yourself as this may be dangerous. - If the mains connection is to be replaced, proceed as in the event of a malfunction. In the event of any breakdown, check the following chart.
Breakdowns Causes Solutions Water drips Iron thermos- Set the thermostat tat control (J) control to the from the holes on the set to the mi- steam zone "···". base of the nimum posiiron when tion "·""··". turning on the steam switch (H). The boiler is too full. Remove some water. The boiler is in a tilted position. Place it on a horizontal surface. The iron does The switch not heat and the LED (K) does not light up. Iron thermostat control (J) set to the minimum position. Faulty power connection.
27 Nourse Avenue Epping 2 Cape Town P.O. Box 975 Eppindust 7475 South Africa Tel: +27 21 534 8114 Fax: +27 21 534 8086 Service Centre Share Call: 086 111 5006 w e b : w w w. c r e a t i v e h o u s e w a r e s . c o . z a MW_EX_23810_BRAVISSIMO_PRO 2_IM.