GLOW ev er l Re _IM.
3 1 6 8 5 4 9 7 Description: 1) Spray button 2) Steam blast button 3) Steam regulator controls 4) Self-clean button 5) Spray nozzle 6) Filling hole 7) Base 8) Temperature gauge 9) Pilot light 11. The iron must not be left unattended while it is connected to the supply mains. 12. The plug must be removed from the socket-outlet before the water reservoir is filled with water. 13. The iron must be used and rested on a stable surface. 14.
6. Throw out any excess water after use, once the iron has been unplugged. Steam Ironing 1. Fill up the iron as described in the section “How to fill the water deposit”. 2. Plug in the iron. 3. Steam ironing is only possible if you select the highest temperature***. Otherwise water may seep through the base of the iron. 4. Wait for the pilot light to go off. 5. Turn the steam regulator to the desired position 6. During pauses and when the ironing is complete, leave the iron standing upright. 7.
TROUBLE SHOOTING Problem Reason Action Pre-caution Iron is leaking water. Temperature is too low Set the temperature to steam setting (cotton) Check fabric type is suitable for high steam temperature Iron is not heating up Steam switch is on self clean Turn steam switch setting to steam or 0 Switch steam setting to 0 (off) after use or function position when filling tank. Tank is overfilled Empty water tank Fill to MAX mark only.
_IM.