Cut Sheet

29
DS
INSTALLATION ACCESSORIES – SIZE 2
POLY CONDUIT ENTRY w/NPT Part #
30° 1/2” 512B3N05
* Interior volume with
receptacle installed.
30° 3/4” 512B3N07
POLY WALL BOX w/NPT
70° 1/2” - 1 1/4” 512C7000
70° poly boxes are
not drilled. Contact
customer service
if factory drilled is
required.
* Interior volume with
receptacle installed.
POLY ANGLE WITH ALUMINUM WALL BOX w/NPT
70° 1/2” 712C7N05
* Interior volume with
receptacle installed.
70° 3/4” 712C7N07
70° 1” 712C7N10
70° 1 1/4” 712C7N12
70° 1 1/2” 712C7N15
METAL BOX w/NPT
0° 1/2” 7T1F0N05
0° 3/4” 7T1F0N07
0° 1” 7T1F0N10
0° 1 1/4” 7T1F0N12
METAL BOX WITH NYLON ANGLE w/NPT
30°
1/2”
712C3N05
* Interior volume with
receptacle installed.
30° 3/4” 712C3N07
30° 1” 712C3N10
30° 1 1/4” 712C3N12
NPT on top or bottom (if rotated). For other NPT configurations, contact customer service.
Nylon ANGLE
30° 512M3
METAL ANGLE
0° 592M0
30° 592M3
FS/FD Box 30° 792M3FS
* Base measures
approximately 4.2” x
2.7”. Due to the varia-
tion in sizes of FS boxes,
please verify that your
FS box matches our
dimensions, if not call
Customer Service for
other solutions.
FINGER DRAWPLATES
61-3A346
Set of Two (2)
Recommended for cord to cord assembly applications,
for easier connector closure.
PROTECTIVE CAP
61-3A426 For Male Devices Only.
PADLOCKABLE PLUG CAP
61-3A826 For Male Devices Only.
SCREWDRIVER FOR TERMINAL SCREWS
SD18 Klein 608-3 1/8” cabinet with 3” round shank.
EASY RETROFIT ADAPTER PLATES
see pg 175 Mount to existing boxes.
RECEPTACLE LOCKING PIN
LP-843 Requires Padlockable Pawl option (-843) on receptacle.
HANDLE w/NPT Part # Poly Part # Metal
1/2” 512P0N05 592P0N05
3/4” 512P0N07 592P0N07
1” 512P0N10 592P0N10
1 1/4” 512P0N12 –
HANDLE w/CORD GRIP Cable Range Poly Metal
.625 - .750” 712P0CP4 792P0CS4
.770 - .875” 712P0DP2 792P0DS1
.870 - 1.000” 712P0DP3 792P0DS3
NYLON HANDLE w/Cable Range
.20 - .82 ” 512P0D21
POLY HANDLE W/CLAMP & BUSHING w/Cable Range
.750 - .875 ” 712P0S14
.875 - 1.000 ” 712P0S16
1.000 - 1.125 ” 712P0S18
1.125 - 1.250 ” 712P0S20
1.250 - 1.375 ” 712P0S22
For available cord grips, see pg 178.
HANDLESANGLES
BOXESMISCELLANEOUS ACCESSORIES
Inlet
(male)
DSN30
* 8.5 in
3
* 85.0 in
3
* 75.0 in
3
* 28.7 in
3
DSN
Cable Range NPT Cable Range NPT
.312 - .625 1/2” .660 - 1.000 1”
.438 - .812 3/4” .875 - 1.375” 1 1/4”
NPT sizes are determined by the cable diameter and third party cord grip.