MSA3 Air Purifier Please retain owner's manual for future reference Membrane Solutions® MSA3 Air Purifier Operators and Maintenance Handbook
Table of Contents Overview Overview..........................................................................................................................1 Getting Started • • • • • • Getting Started ..............................................................................................................2 Introduction ..............................................................................................................2 Health and Safety ..................................................
Getting Started Introduction Thank you for purchasing the Membrane Solutions® MSA3 Air Purifier, delivering clean and healthy air for you and your home or office. Please contact us for the latest product information, including operator manuals, videos, support materials, and where to purchase items. The MSA3 is a durable piece of equipment, with proper care it will last for many years.
Operating Guidelines The following table lists the operating parameters for this product. Operating this product outside these specifications may cause system performance issues and may even lead to personal injury and void any warranty. Please contact Membrane Solutions® for further advice and support. Installation guide System Contents Your Membrane Solutions® MSA3 Air Purifier was carefully assembled, packaged, and shipped complete with all the parts you should require.
Commissioning the system Operating Guide Step 1 Control Panel Before using the air purifier for the first time, open the panel and remove the composite filter. Make sure to remove any packaging from the filter element, or the product will not function correctly. Power Button Press the Power button to put the air purifier into operating mode. Press the power button a second time to stop the air purifier and place it into standby mode. Step 2 Plug the air purifier power plug into an electrical outlet.
Sleeping Mode Press the sleep button to put the unit into Sleep Mode. In this mode the fan is at its lowest/quietest setting. Also, only the Sleep and Power buttons are illuminated to help keep the room dark. Filter Replacement Step 1 Press the power button to turn the air purifier off, unplug the power cord from the electrical outlet. Timer Press the timer button to set the timed auto-off feature. The unit can be set run between 1 and 8 hours.
Step 4 Troubleshooting Guide Reinstall the panel and lock the panel by pressing both sides of the top of the panel. After replacing the filter, plug the power cord back into an electrical outlet. Hold down the reset button for 3 seconds to reset the filter timer. The indicator light will flash 3 times and then go out, showing the reset was successful. (See Page 8) Problem 1 2 The air purifier will not turn on or respond to the power button Airflow is significantly reduced www.mspurelife.com www.
Troubleshooting Guide Problem 6 Possible Solution The filter indicator light is on The air filter is 100% exhausted and requires replacement. (see page 9) 7 Only the sleep indicator light is on, yet the purifier is still operating. The air purifier is in sleep mode, push the fan speed button to change the operating mode, indicator lights will turn on again. 8 If your problem is not listed Please contact Membrane Solutions® Customer Service.
Notes: Who we are • Membrane Solutions® is a purification brand from the United States, specializing in creating a better, healthier you through improved filtration and purification technologies. • Back to nature, clean water, and fresh air. Membrane Solutions® promotes the philosophy of a 'minimalist lifestyle' that is committed to creating a simple, clean, and comfortable environment. • Membrane Solutions® design product's to be both smart, easy to operate, and practical in appearance and functionality.
