MSB3 Air Purifier Please retain owner's manual for future reference Membrane Solutions® MSB3 Air Purifier Operators and Maintenance Handbook
Table of Contents Overview Overview .................................................................................................................. 1 Getting Started • • • • • • Getting Started........................................................................................................ 2 Introduction........................................................................................................ 2 Health and Safety ....................................................................
Getting Started Introduction Thank you for purchasing the Membrane Solutions® MSB3 Air Purifier, that delivers clean and healthy air for you and your home or office. Please contact us for the latest product information, including operator manuals, videos, support materials, and where to purchase items. The MSB3 is a durable piece of equipment, with proper care it will last for many years.
Operating Guidelines The following table lists the operating parameters for this product. Operating this product outside these specifications may cause system performance issues and may even lead to personal injury and void any warranty. Please contact Membrane Solutions® for further advice and support. Installation guide System Contents Your Membrane Solutions® MSB3 Air Purifier was carefully assembled, packaged, and shipped complete with all the parts you should require.
Commissioning the system Operating Guide Step 1 Control Panel Before using the air purifier for the first time, open the filter cover and remove the composite filter. Make sure to remove any packaging material from the filter element, or the product will not function correctly. Power Button When the power adaptor is first connected to the purifier, the indicator light around the power button will be red, indicating the air purifier is in standby mode.
Filter Timer The filter element lifespan is dependent on how many hours the air purifier is utilized and which mode of operation is used. The system automatically monitors the fan speed and operational hours, when the filter lifespan reaches 100% the filter reset button will flash red. Filter Replacement Step 1 Press the power button until the indicator light turns red, Unplug the power adaptor from the powered outlet, and unplug the air purifier.
Step 4 Troubleshooting Guide Slot the new filter into the base of the purifier. Replace the filter cover and twist in the closed direction to lock it in place. Turn the purifier upright. Plug in the air purifier and follow the Filter reset instructions. (See Page 10) The actual lifespan of the filter may vary depending on the amount of dust, smoke, humidity, and the concentration of other airborne particles and vapors in the air.
Troubleshooting Guide Problem 6 7 Possible Solution The red change filter indicator light is flashing The change filter indicator light will flash each time the filter needs to be changed. If your problem is not listed Please contact Membrane Solutions® Customer Service Warranty Membrane Solutions® warrants to the customer that its residential air purifiers will be free from defects in material and workmanship under normal use and service for a period of 1 year.
Notes: Who we are • Membrane Solutions® is a purification brand from the United States, specializing in creating a better, healthier you through improved filtration and purification technologies. • Back to nature, clean water, and fresh air. Membrane Solutions® promotes the philosophy of a 'minimalist lifestyle' that is committed to creating a simple, clean, and comfortable environment. • Membrane Solutions® design product's to be both smart, easy to operate, and practical in appearance and functionality.