User Manual

Filter Timer
The filter element lifespan is dependent on
how many hours the air purifier is utilized
and which mode of operation is used.
The system automatically monitors the fan
speed and operational hours, when the filter
lifespan reaches 100% the filter reset button
will flash red.
Filter Reset
Filter Replacement
Step 1
Press the power button until the indicator
light turns red, Unplug the power adaptor
from the powered outlet, and unplug the air
purifier.
Invert the air purifier on a soft surface (to
avoid scratching the case). Twist the filter
cover in the open direction and lift off the
filter cover, then remove the old filter.
Step 2
Clean out any accumulated dust, lint, or hair
inside the air purifier using a vacuum hose of
dry cloth.
DO NOT use water or liquids to clean the air
purifier.
Step 3
Remove any packing material from the new
filter element.
8
9
When the filter lifespan reaches 100%, the
filter reset button will flash red while the
unit is operating; Use a paperclip (straighten
out the end) or something similar (e.g.,
toothpick) to press the filter reset button for
3 seconds while in operation mode. The filter
reset button will flash red and beep 3 times,
indicating the filter life timer has been
successfully reset.
The actual lifespan of the filter may vary depending on the amount
of dust, smoke, humidity, and the concentration of other airborne
particles and vapors in the air.