Manual

D24042 | Date 09/2014 3

AtmoCONTROL

About this manual

Purpose and

target group

This user manual describes the installation and use of the MEMMERT programming software

AtmoCONTROL. It is intended for use by trained personnel of the operator, who have the task

of programming/operating MEMMERT appliances.

If you intend to work with the software, please read this manual carefully before starting. Fa-

miliarise yourself with the software and simulate various tests before transferring programmes

to the appliance. Incorrect use could result in damage to the appliance and/or to the chamber

load.

If there is something you do not understand, or certain information is missing, ask your supe-

rior or contact the manufacturer. Do not do anything without authorisation.

Other documents that have to be observed

Please also read the user manual for the respective appliance or appliances to be operated

with AtmoCONTROL and familiarise yourself with it.

Storage and

resale

This manual should always be kept in a place where those working with the software have

access to it. It is the responsibility of the operator to ensure that persons who work with or

will work with the software are informed as to the whereabouts of this user manual. We rec-

ommend that it is always stored in a protected location close to the computer on which the

software is installed. Make sure that the manual is not damaged by heat or damp.

Update

The current version of AtmoCONTROL and this manual are available for download at