Operating instructions

PERFECT page 20

Programming example programme operation

The oven (UFP500) has to heat up as quickly as possible to 180°C on Monday at 08.00 hrs with a fan speed

of 50% and the air valve open 20%. The oven has to hold this temperature for 45 minutes with the air

valve 50% open, followed by cooling down in one hour to 60°C with fan switched off and the air valve

open 20%.

Mo 8:00h

0:45h

1:00h

0˚C

250˚C

200˚C

150˚C

100˚C

50˚C

˚C

t=time

1. Select operating mode “programme“

After holding down the SET key (approx. 3 sec) the current operating

mode is flashing. Hold down the SET key and select operating mode

“programme“ using the push/turn control.

After the SET key has been released the controller is in operating mode

“programme operation“.

SETUP

2. Edit programme

Hold down the SET key and turn the push/turn control to select

”EDIT”.

After the SET key has been released, the controller is in the programme

writing mode.

3. Weekday for delayed programme start

Hold down the SET key and turn the push/turn control to set the start

day Mo.

T u

4. Select clock time for delayed programme start

Using the push/turn control, select the time display.

Hold down the SET key and set the time 08:00 using the push/turn

control.