Operating instructions

PERFECT page 24

12 Basic oven settings

SETUP

In this operating mode it is possible to make the basic settings of the oven. Clock time, date, day, year, and

settings of sounder, of address assignment, monitoring units, heater power and calibration are set here.

The following parameters can be selected by turning the push/turn control, and altered as described in the

Section „Setting the parameters“:

Clock time in 24-hour format

The winter/summer time changeover does not take place automatically

but must be set manually by the user.

Date

The controller incorporates a calendar which automatically allows for

the different lengths of the months and also for leap years.

Weekday

Year

Range: from 2000 to 2100

Audible signal at programme end

Setting: OFF or ON

Audible signal on alarm, e.g. overtemperature

ALARM SOUND

Setting: OFF or ON

Communication address

Range: 0 to 15

(see Section „Communication interface”)

Ratio of top to bottom heat

Range: -50% to +50%

(see Section „Balance”)